If you notice a leaked faucet in your home, do not panic. It is very natural for the shower or the faucet to wear and tear after consistent usage. It is a sign that you need to get the leakage repaired in order to enjoy uninterrupted functioning of the same and to save water.
Is there a leakage in your home?
The biggest investment you make is your house and you want to live in it for an entire lifetime. Structured with modern design, the house has walls and floors that have been built long back. The constant use of the same will lead to wear and tear and the same will eventually become noticeable. The vibration of the walls and floor can cause hairline cracks across different locations and the same causes leakage in the bathroom or in the sink. If the same is overlooked, there could be mold in the walls of the bathroom and your repair expenses will only rise. Jim Dodgson of https://sealritesolutions.com.au/ explains that mold and mildew can grow extremely quickly in a leaky shower because the moisture never leaves.
Do not look for temporary fixes because it will not last longer than a few months--
You need to understand that replacing the cracked grout with a new tile grout and simply applying a waterproof sealer will only result in more cracks in the future. It is not a permanent solution and is a temporary fix. Further, brush on the water proof surface coatings will not eliminate the leaks. Hence, do not waste your money on it because the leak occurs where the wall and the floor tiles are separated in the corner of the shower cubicle. You will have to take effective measures to deal with the leakage.
Those who think that the leakage can only be detected through a water detector tool, you are wrong. There is no need for the tool to find a leak. The detectors are useless when you try to determine the source of the leak. If you think using a sealant or a silicone will fix your problem, it will give you a temporary solution but the leak will re occur. It is not a permanent solution. It is actually possible to fix a leakage without the help of professionals if the leakage is minor. You will not have to pay anyone if you can do it yourself.
Identifying the leak--
The first step to fixing a leakage is to identify one. You can do this by thoroughly going through every tap and faucet in your home and identifying even the smallest leakage. You will have to identify the leak source in order to determine how you can fix it. It is not easy to find the right location and here are three clues to help you with the same.
Frequency of the leak: The best indicator is the drip frequency. Sometimes the dripping will coincide with the rain and is a sign of a leakage in the roof. When you notice a constant flow of water, it shows that the leak is plumbing related.
Leak color: You can also identify the location of the leak by looking at the color of the water that is dripping from the ceiling. The sign of a leaking roof is dirty or brown water and it will make way into the home from the roof while picking up impurities along the way. If you notice clear dripping, it is a sign of an interior plumbing leak. In case of a leaking from the pipe, there will not be as much grime and dirt.
Insulation Dryness: You can identify the source of your leak through attic insulation. For this, you will have to gain access to the attic and feel the top of the insulation which covers the leaking portion of the ceiling. If that is dry, the leak lies below the insulation attic. You can remove the same and look for signs of damage. In case the top of the insulation looks wet, the leak is most likely located above the wall or roof of the insulation.
You do not need a specific device to determine the location of the leak. It can be done by a layman and the entire process of repairs or replacement is simple and quick. The repair process will save you a lot of money and water which might be going down the drain due to the leakage.
No comments:
Post a Comment